Fire Sprinkler Corrosion: The True Threat of a High Corrosion Problem to a Fire Sprinkler Line

There are three basic electrical hazards that cause injury and death: shock, arc-flash, and arc-blast. Following these safety principles can result in a safer work environment and prevent injuries or even death.

Wind energy is one of the fastest-growing sectors in the renewable energy industry. However, there are short-term safety issues of wind energy that must be addressed to ensure the well-being of workers and communities involved in the construction, maintenance, and operation of wind farms. In this FAQ, we will explore some pressing safety issues and how JMS—a leader in wind energy solutions—effectively addresses them.

Maintenance workers, especially those responsible for the upkeep of industrial machinery, face many workplace hazards, from strains, sprains, and tears to lacerations and fractures. Fortunately, numerous innovations have been developed in the maintenance safety world to reduce the risk of accidents and injuries, including those discussed in detail in this guide.

About 80 percent of maintenance mistakes involve human factors (HF), according to the Federal Aviation Administration. The maintenance world has unique HF issues that are more severe and longer lasting than elsewhere in aviation. Operators are looking at various techniques to combat HF challenges.

When we have catastrophic events such as the club fire in RI, the inspection process that allowed code violations to go uncorrected for two years needs to be revisited. Many inspectors view their daily work in a way that results in the low hanging fruit getting picked, but the more difficult to reach fruit on high branches going untouched. When an agency is responsible for inspections for compliance with safety, health, fire and/or environmental standards there needs to be a meaningful quality control or improvement program in place. Citizens or your community deserve no less.

Hour after hour, in businesses of all sizes, these workhorses respond to the men and women who operate them – by pounding, cutting, crushing, welding, stitching or whatever other task they were designed for, to fashion the products that will be marketed to hungry consumers. But there is a fearful downside to this scenario: the machine cannot distinguish between a piece of wood, steel or fabric and the operator’s body.

Significant engineering and test efforts have been undertaken in the last few years into the area of arc flash/blast hazards in electrical equipment. The result has been a better understanding of arcing faults and how to prevent and/or minimize the hazards to personnel and equipment. This paper highlights some of the findings that may help in safety management and equipment selection. This paper concludes with some design considerations that will help reduce the hazards of arcing faults.